FAQ
Q
How to solve the warning problem of X、Y axis beyond limit?
A
There are 5 possibilities: 1. Please refer to the FTP for the detailed instruction of modifying handholder parameters to reset the machine size value. The ftp address is: ftp://client_t@210.51.10.106:8012/ how to modifying parameters.doc 2. The drawing size of the cutting program was excess the machine size. 3. Haven`t gone machine home point. 4. Haven`t set program home point. 5. The start point for cutting is wrong.
Contáctenos
Teléfono : 86-10-51662600         E-Mail: info@Steeltailor.com