Home >CNC Cutting Machines >Manual >Power
  • SteelTailor Description
  • Information for your safety
  • Packing List
  • Assembly
  • Installation of Fast CAM Software
  • Operating Panel
  • Operation
  • Instructions of AHC system
  • Maintenance
  • Appendix 1 G codes
  • Appendix 2 M codes
  • Appendix 3 Error code list
  • Appendix 4 Cutting parameters for Oxy-propane
  • Trouble shooting

Power Seires - cnc cutting machines

SteelTailorTM Power Portable CNC cutting machines User's Manual

Engage the rear right and left guiding blocks onto the rails and move the Central Unit in the same direction to the front guiding blocks to install SteelTailor CNC Cutting Machine. See picture 6
cnc_cutter_CRear guiding blocks to be inserted
Picture 6: Rear guiding blocks to be inserted onto the rails

Lift a bit the rear of the Central unit to avoid contact between the edge of the frame and the pinion.
Move the Central Unit till the pinion is engaged into the rack.
Reinstall the mechanical stops
The Central Unit is on the Longitudinal Rails in place now.