Home >CNC Cutting Machines >Manual >Power
  • SteelTailor Description
  • Information for your safety
  • Packing List
  • Assembly
  • Installation of Fast CAM Software
  • Operating Panel
  • Operation
  • Instructions of AHC system
  • Maintenance
  • Appendix 1 G codes
  • Appendix 2 M codes
  • Appendix 3 Error code list
  • Appendix 4 Cutting parameters for Oxy-propane
  • Trouble shooting

Power Seires - cnc cutting machines

SteelTailorTM Power Portable CNC cutting machines User's Manual

4.3. Central Unit Installation
Remove the mechanical stops screwed on the rack.
Hold the Central Unit with the front panel forward in order to make the rack screwed on the frame on the left hand side.
Insert the front right and left guiding blocks onto the rails with care to install SteelTailor CNC Cutting Machine.See picture 4.
cnc_cutter_Central Unit Installation - Details
Picture 4: Central Unit Installation - Details

Move the Central Unit forward slowly in the direction shown in the Picture 5.
cnc_cutter_Sliding of the Central Unit - Details
Picture 5: Sliding of the Central Unit on the Rails